RXR-JM200D-P Oil Hydraulic Firefighting Dismantling And Extinguishing Robot

3.1 Robot (Robot as a Whole)

1. Name: Fire Rescue and Extinguishing Robot (Demolition)
2. Model: RXR - JM200D - P
3. Basic Functions: Used for on - site surveying, obstacle - clearing, and danger - removing in narrow spaces such as urban underground spaces, collapsed tunnels, and pipelines. Equipped with attachments such as a breaker, rock saw, etc., it has functions such as demolition, cutting, shearing, and grabbing.
4. Compliance with Fire Industry Standards: Comply with "GA 892.1 - 2010 Fire Robots - Part 1: General Technical Conditions"
5. Chassis Structure: Adopts an ATV hydraulic crawler chassis
6. Power: Power ≥ 43KW, four - cylinder water - cooled four - stroke diesel engine, hydraulic pump unit system
7. Equipped with attachments: Equipped with attachments such as a breaker, circular saw, hydraulic shear, and gripping device, with functions such as demolition, cutting, shearing, and grabbing
8. Curb Weight: ≤ 5t
9. Traveling Speed: ≥ 2.5km/h, remote - controlled stepless speed change
10. Climbing Ability: ≥ 58% (or 30°)
11. Fuel Tank Capacity: ≥ 80L
12. Rotational Speed: ≥ 5r/min
13. Maximum Attachment Weight: ≥ 300kg
14. Farthest Working Range: ≥ 6100mm
15. Highest Working Range: ≥ 6500mm
16. Deepest Working Range: ≥ 3100mm
17. Breaker: Total weight: ≥ 360kg, flow rate: 40L/min - 70L/min, pressure ≥ 110bar, striking frequency: 500bpm - 900bpm
18. Gripping Device: ≥ 120kg, working pressure (closing): 110 - 140kg/cm², working pressure (rotation): 60 - 90kg/cm²
19. Circular Saw: Can cut reinforced concrete, stone, metal sheets, wood, etc., with a circular blade diameter ≥ 750mm
20. Hydraulic Shear: Maximum shearing force ≥ 500KN
21. Crawler Material: Metal crawler, rubber blocks can be added
22. Crawler Width: ≥ 280mm, length ≥ 1600mm
23. Meeting the requirements for working in dark rescue environments: At least 2 working lighting lamps are installed at the front of the platform, and at least 2 side lamps are installed.
24. Robot Fire - extinguishing System: Domestic electronically - controlled fire monitor. Material: Monitor body - stainless steel, monitor head - hard - anodized aluminum alloy. Working pressure (Mpa): 1.0 - 1.2 (Mpa), water/foam flow rate: 80L/s, range (m): ≥ 85m (water)
25. Configuration of multi - gas detection module, with technical parameters as follows:
    • Detection types and ranges: Methane: 0 - 100%VOL, carbon dioxide: 0 - 5%VOL, carbon monoxide: 0 - 5000ppm, nitrogen dioxide: 0 - 50ppm, ammonia: 0 - 100ppm, oxygen: 0 - 30% O2, humidity: 0 - 100RH, temperature: - 20 - 100℃
    • Protection Level: ≥ IP65
    • Explosion - proof Performance: Not lower than Ex d ib I Mb
    • The toxic and harmful gas detection and alarm system for special disaster rescue shall pass the inspection by a national - level authoritative testing institution. Provide a copy of the certificate.
    • It has a Pattern Approval Certificate for Measuring Instruments (CPA). [Provide a copy of the Pattern Approval Certificate for Measuring Instruments with the bidder's official seal to prove it.]
26. Audio - video: Equipped with 4 high - definition cameras to achieve remote monitoring of the on - site environment.
27. Multiple hydraulic output power interfaces: Hydraulic flow rate of power interfaces: Ultra - high - pressure flow rate ≥ 0.7L/min; low - pressure flow rate ≥ 4L/min, maximum working pressure: pressure ≥ 72MPa
28. Function: Reserved ultra - high - pressure output interfaces, two ultra - high - pressure outputs, and the two ultra - high - pressure outputs can be used independently without affecting each other. It can be externally connected to a hydraulic circular saw, hydraulic spreader, hydraulic generator, etc.
29. Configuration of leakage detection module, with technical parameters as follows:
    • Equipped with a handheld leakage alarm, which can detect in real - time whether there is a leakage phenomenon in the surrounding environment.
    • In water rescue, it can detect the leakage of 120/240 - volt lines more than 3 meters away.
30. Configuration of a handheld integrated remote - control terminal, with technical requirements as follows: Working time 8h, obstacle - free remote - control distance ≥ 1km, not less than 10.1 - inch high - brightness display screen; video display, robot control, working information, and alarm information are displayed on the same display screen, with an anti - rollover safety warning function. The vehicle is equipped with a long - distance remote control and a short - distance remote control according to the visible and non - visible distances. The short - distance remote control is used for short - distance transfer, status demonstration, etc.

3.2 Others